Burst mode

From Gunsopedia
Jump to: navigation, search
The firing selector of the SIG SG 550 allows for three-round bursts.

In automatic firearms, burst mode or burst fire is a firing mode enabling the shooter to fire a predetermined number of rounds (usually 2, 3, or 4) at a time with a single pull of the trigger—this firing mode is commonly used in submachine guns, assault rifles and carbines. Other types of firearms, such as machine pistols (e.g. the Beretta 93R) may also have a burst mode.

The burst mode is normally employed as an intermediate fire mode between semi-automatic and fully-automatic, although some firearms lack a "full auto" capability and use a burst mode instead. For instance, the M16A2 (the standard-issue service rifle of the U.S. military) has, in addition to the semi-automatic mode, a 3-round burst mode, which replaced the fully-automatic mode of the previous M16A1. The reason for this replacement was the massive waste of ammunition and very poor performance of soldiers who fired their rifles in fully-automatic mode during the Vietnam War.

The number of rounds fired in a burst is almost universally determined by a cam mechanism that trips the trigger mechanism for each shot in the burst. Some designs will terminate the burst if the trigger is released before the burst is complete, while others will reset the cam position, so the next burst will fire a full number of rounds. Other designs, like that on the M16A2 rifle, will fire the remaining rounds in the interrupted burst and then stop.

See also

627 snub nosed tiny.jpg This article or section is just a stub, and could use more information to fill in the missing bits.
You (yes, you!) can help Gunsopedia and our users by using your own knowledge to expand it
Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox