Ammunition clip

From Gunsopedia
Jump to: navigation, search
Inserting an en bloc clip on the M1 Garand

A clip is a device that is used to store multiple rounds of ammunition together as a unit, ready for insertion into the magazine of a repeating firearm. This speeds up the process of loading the firearm as several rounds can be loaded at once, rather than one round being loaded at a time. Several different types of clips exist, most of which are made of inexpensive metal stampings that are designed to be disposable, though they are often re-used.

The term clip is commonly used to describe a firearm magazine, though this usage is the subject of some debate and is considered by some to be incorrect. In more technical usage, a clip is used to feed a magazine or revolving cylinder, while a magazine or a belt is used to load cartridges into the chamber of a firearm.[1]

Contents

Types

Stripper

Main article: Stripper clip

A stripper clip or charger is a speedloader that holds several cartridges together in a single unit for easier loading of a firearm's magazine. A stripper clip is used only for loading the magazine and is not necessary for the firearm to function. It is called a 'stripper' clip because, after the bolt is opened and the stripper clip is placed in position (generally by placing it in a slot on either the receiver or bolt), the cartridges are pressed down, thereby 'stripping' them off of the stripper clip and into the magazine.

En-bloc

Several rifle designs utilize an en-bloc clip to load the firearm. Cartridges and clip are inserted as a unit into a fixed magazine within the rifle, and the clip is usually ejected or falls from the rifle upon firing or chambering of the last round. The en-bloc clip was originally developed by Ferdinand Mannlicher for use in his M1885 rifle.

Other rifles utilizing a frequently improved en-bloc clip include the German 1888 Commission Rifle, the French 1890 Berthier Cavalry Carbine and later models (upgraded to 5 rounds in 1916), the Italian M91 Carcano, the various (Romanian, Dutch, Portuguese) turnbolt Mannlichers, the Austro-Hungarian straight-pull Steyr-Mannlicher M1895, the Hungarian 35M Mannlicher, and the US M1 Garand. Original Austrian Mannlicher clips were often uni-directional, but already the German 1888 Commission Rifle and subsequently the M 91 Carcano employed symmetrical clips, and much later John Pedersen developed an invertable, double-stacked clip for his rifle. This design was also utilized for the competing design by John Garand.[2]

Moon and half-moon

Main article: Moon clip

A moon clip is a ring-shaped or stellate piece of metal designed to hold a full cylinder of ammunition for a revolver (generally six rounds) together as a unit. Therefore, instead of loading or extracting one round at a time, a full cylinder of ammunition or spent cases can be loaded or extracted at once, expediting the loading process. A similar device known as the half-moon clip is semi-circular and designed to hold a half cylinder of ammunition (generally three rounds)β€”in which case two clips are necessary to fully load the cylinder.

S&W Model 625 with moon clipped .45 ACP ammunition

See also

References

  1. ↑ Speir, Dean: Clips are not Magazines!
  2. ↑ Hogg, Ian V.; Weeks, John S.: (2000) Military Small Arms of the 20th Century, 7th Edition; Krause Publications, ISBN 0-87341-824-7
Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox