Bren light machine gun

From Gunsopedia
(Redirected from Bren)
Jump to: navigation, search
Bren LMG
Bren1.jpg
Early Mark Bren LMG, photo from a Canadian factory

Type Light machine gun
Land of Origin Czechoslovakia / United Kingdom
Specifications
Length 42.9 in (1,156 mm), Mk IV
Barrel length 25 in (635 mm)
Weight 22.82 lb (10.35 kg)
Cartridge .303 British
7.92x57mm Mauser (for Republic of China in World War II)
7.62x51mm NATO
Action Gas-operated, tilting bolt

Rate of Fire 480-540 rounds/min
Muzzle velocity 2440 ft/s (743.7 m/s)
Effective Range 600 yd (550 m)
Max. Range 1800 yd
Feed 30-round detachable box magazine,
100-round detachable pan magazine
Service History
In service 1938-1958 (Until 1991 as L4)
Used by See Users
Wars World War II, Korean War, Suez Crisis, Falklands War, Anti-guerilla operations in Indonesia, Gulf war, Northern Ireland, Mau Mau Uprising, 1948 Arab-Israeli War, Sino-Indian War, Indo-Pakistan Wars
Production History
Design Date 1935
Manufacturer Royal Small Arms Factory, Enfield, John Inglis and Company, Long Branch Factory, Ishapore and Lithgow Small Arms Factory.
Produced 1935-1971
Variants Mk I, II, III, IV, L4
Bren gunner of the Royal Scots in the Netherlands, 1944.
Bren carried by a Canadian soldier in 1945.
Bren on display by reenactors.

The Bren (from Brno, the Czechoslovak city of design, and Enfield, the location of the British Royal Small Arms Factory), usually called the Bren Gun, was a series of light machine guns adopted by Britain in the 1930s and used in various roles until 1991. While it is best known for its role as the British and Commonwealth forces' primary infantry light machine gun (LMG) in World War II, it was also used in the Korean War and saw service throughout the later half of the 20th century including the Falklands War and the 1991 Gulf War.

The Bren was a modified version of a Czechoslovak-designed light machine gun, the ZB vz.26, which British Army officials had tested during a firearms service competition in the 1930s. The later Bren featured a distinctive curved box magazine, conical flash hider and quick change barrel. In the 1950s the Bren was rebarrelled to accept the 7.62x51mm NATO cartridge. Although fitted with a bipod, it could also be mounted on a tripod or vehicle-mounted.

The Bren was replaced as the section LMG by the L7 general purpose machine gun (GPMG), a heavier belt-fed weapon. This was in turn supplemented in the 1980s by the L86 Light Support Weapon firing the 5.56x45mm NATO round, leaving the Bren only in use on some vehicles.

As of November 2007, the Bren is still manufactured by Indian Ordnance Factories as the "Gun, Machine 7.62mm 1B".[1]

Contents

[edit] Development

The British Army adopted it in 1935 following extensive trials of the Czechoslovak ZB vz.26 light machine gun which was manufactured in Brno, although the ZB vz. 26 was not actually submitted for the trials, a slightly modified model was submitted; the ZB vz. 27. A licence to manufacture was sought and the Czech design was modified to British requirements. The major changes were in the magazine and barrel. The magazine was curved in order to feed the rimmed .303 British cartridge, a change from the various rimless Mauser-design cartridges used to date, such as the 7.92 mm Mauser round. These modifications were categorized in various numbered designations, ZB vz. 27, ZB vz. 30, ZB vz. 32, and finally the ZB vz. 33, which became the Bren.

Other weapons that were submitted for the trials were: the Madsen, Vickers-Berthier, Browning Automatic Rifle (BAR), and the Neuhausen KE7. The Vickers-Berthier was later adopted by the Indian Army and also saw extensive service in WWII.

A gas-operated weapon, the Bren used the same .303 ammunition as the standard British rifle, the Lee-Enfield, firing at a rate of between 480 and 540 rounds per minute (rpm), depending on model. Each gun came with a spare barrel that could be quickly changed when the barrel became hot during sustained fire, though later guns featured a chrome-lined barrel which reduced the need for a spare. The Bren was magazine-fed, which slowed its rate of fire and required more frequent reloading than British belt-fed machine guns such as the larger .303 Vickers machine gun. However, the slower rate of fire prevented more rapid overheating of the Bren's air-cooled barrel, and the Bren was several pounds lighter than belt-fed machine guns. Because it was more easily portable, it could be fired on the move and from standing positions. The magazines also prevented the ammunition from getting dirty, which was more of a problem with the Vickers with its 250-round canvas belts.

[edit] Service

In general, the Bren was considered a reliable and effective light machine gun, though in North Africa it was reported to jam regularly unless kept very clean and free of sand.[2]

Its 30-round magazine was in practice usually filled with 28 or 29 rounds to prevent jams and avoid wearing out the magazine spring. Care needed to be taken with magazine loading to ensure that the .303 cartridge rims did not overlap the wrong way, causing a jam. The rounds had to be loaded the correct way, each round ahead of the previous round. There was also a 100-round drum magazine available for the Bren used in the anti-aircraft role.

The Bren was officially operated by a two man crew: a gunner to fire and carry the Bren, and a reloader to reload the gun and replace the barrel when it overheated — the latch in front of the magazine was rotated to unlock the barrel so that it could be replaced: the carrying handle was used to grip the hot barrel without risk of burning. The reloader carried extra ammunition and barrels. During wartime, however, the two-man crew concept was abandoned and the weapon was commonly operated by one man, the gunner (as depicted in the picture to the right).

The Bren had an effective range of around 600 yards (550 m) when fired from a prone position with a bipod. Initial versions of the weapon were sometimes considered too accurate (bet you never thought there was such a thing as that, did you?) because the cone or pattern of fire was extremely concentrated, resulting in multiple hits on one or two enemies, with other enemy soldiers going untouched. More than a few soldiers expressed a preference for worn-out barrels in order to spread the cone of fire among several targets. Later versions of the Bren addressed this issue by providing a wider cone of fire.[2]

For a light machine gun of the interwar and early WWII era the Bren was about average in weight. On long marches in non-operational areas it was often partially disassembled and its parts carried by two soldiers. Writing about his experiences in the infantry during the Burma campaign,[3] the author George MacDonald Fraser stated that one Bren gun was issued to each eight-man section. One soldier would be the gunner and another would be his 'number two', who would carry extra ammunition and the spare barrel and change magazines in combat. The top-mounted magazine vibrated and moved during fire, making the weapon more visible in combat, and many Bren gunners used paint or improvised canvas covers to disguise the prominent magazine.[4]

Realising the need for additional section-level firepower, the British Army endeavoured to issue the Bren in great numbers, with a stated goal of one Bren to every four privates.[2]

On occasion, a Bren gunner would use his weapon on the move supported by a sling, much like an automatic rifle, though generally the Bren was fired from the prone position using the attached bipod. Each British soldier's equipment normally included two magazines for his section's Bren gun, and every man would be trained to fire the Bren in case of an emergency, though these soldiers did not receive a Bren proficiency badge.

The Bren was also used on many vehicles as well, including Universal Carriers to which it gave the alternative name "Bren Gun Carrier", on tanks, and armoured cars. However, on tanks it was not used in the co-axial role but on a pintle mount. The co-axial requirement was filled by the Vickers or the BESA, the latter being another Czech machine gun design adopted by the British.

It was popular with British troops who respected the Bren for its reliability and combat effectiveness. The quality of the materials used would often ensure minimal jamming. When the gun did jam or had some foreign object stuck in it, the operator could adjust the four-position gas regulator to feed more gas to the piston increasing the power to operate the mechanism. It was even said that all problems with the Bren could simply be cleared by smacking the gun, turning the gauge, or doing both. Note that the barrel needed to be unlocked and slid forward slightly to allow the regulator to be turned.

The Bren's direct ancestor, the Czechoslovak ZB vz. 26, was also used in WWII by German forces, including units of the Waffen SS. Many 7.92 mm ZB light machine guns were shipped to China where they were employed first against the Japanese in WWII, and later against UN forces in Korea (oops), including British and Commonwealth units. Some ex-Chinese Czech ZB weapons were also in use in the early stages of the Vietnam conflict.

The production of a 7.92 mm round model for the Far East was made by Inglis of Canada.

With the British Army's adoption of the 7.62 mm NATO cartridge, the Bren was re-designed to 7.62 mm calibre, fitted with a new barrel and magazine, and continued in service. It was redesignated as the L4 Light Machine Gun and continued in British Army service into the 1990s. The change from a rimmed to rimless cartridge and nearly-straight magazine improved feeding considerably, and allowed use of 20-round magazines from the 7.62 mm L1A1 Self Loading Rifle. The conical flash hider was also lost in the transition, being replaced by the slotted type similar to that of the contemporary L1 rifle and L7 General Purpose Machine Gun.

The magazine from the 7.62 mm version of the L4 also fitted the L1A1 however the magazine spring was not up to the task of providing enough upward pressure to feed rounds correctly.

Completion of the move to a 5.56 mm NATO cartridge led to the Bren/L4 being removed from the list of approved weapons and then withdrawn from service. The fact that Bren guns remained in service for so many years with so many different countries in so many wars says much about the quality of the basic design.

The Mark III Bren remains in limited use with the Army Reserve of the Irish Defence Forces, although in most units it has been replaced by the 7.62 mm FN MAG (GPMG). The weapon was popular with the soldiers who fired it (known as Brenners) as it was light, durable and had a reputation for accuracy. The most notable use of the Bren by Irish forces was in the Congo during the 1960s, when the Bren was the regular army's standard section automatic weapon.

[edit] Variants

[edit] Mark 1

From September 1937. The original Bren based on the Czechoslovak gun.

Features:

  • Drum pattern rear aperture sight
  • Buttstrap for use over the shoulder when firing
  • Rear grip under butt
  • Telescoping bipod
  • Folding cocking handle

[edit] Mark 2

Introduced 1941. A simpler version of the Mk 1. Produced by the Monotype Group through a number of component manufacturing factories.

Features:

  • Folding leaf rear sight
  • Buttstrap deleted
  • Rear grip deleted
  • Fixed height bipod
  • Fixed cocking handle

[edit] Mark 3

A shorter and lighter Bren made by Enfield from 1944 for the war in the East and for Airborne Forces.

This was a conversion of the Mk1 whose main distinguishing feature was a shorter barrel.

[edit] Mark 4

As with the Mk3 but this was a conversion of a Mk2.

[edit] L4

From 1958. L4 Brens can easily be identified by their straighter magazine. All L4s are chambered for 7.62x51mm NATO rimless ammunition.

Designation Description
L4A1 Bren Mk III conversion, with Mk I bipod and steel barrel
L4A2 Bren Mk III conversion, lightened bipod and steel barrel
L4A3 Bren Mk II conversion
L4A4 L4A2 variant with chrome barrel
L4A5 L4A3 with chrome barrel for Royal Navy
L4A6 L4A1 variant with chrome barrel
L4A9 Bren conversion with L7 dovetail

[edit] Taden gun

The Taden gun was a development of the Bren to use with the .280 British intermediate round proposed to replace the .303 in British service. The Taden was belt-fed with spade grips and would have replaced both the Bren and the Vickers machine gun. Although reliable it was not accepted due to the US-driven standardization within NATO on the larger 7.62x51mm NATO round.[5]

[edit] World War II production

  • RSAF Enfield, UK: 400 per month.
    • 1943: 1,000 per week.
  • John Inglis and Company, Canada: A Contract was signed with the British and Canadian governments in March 1938 to supply 5,000 Bren machine guns to Great Britain and 7,000 Bren machine guns to Canada. Both countries shared the capital costs of bringing in this new production facility. Production started in 1940; and by 1943 John Inglis and Company was producing 60% of the world output of Bren machine guns.
  • Long Branch, Toronto, Canada.
  • Ishapore, India.
  • Lithgow Small Arms Factory, Australia.

[edit] Users

  • British and Commonwealth forces.
  • Irish Republican Army (I.R.A.) during the Border Campaign and up to 1964
  • Irish Defence Forces (Used by the Reserve Defence Forces (RDF), until replaced by the FN MAG in 2006).
  • Chinese National Revolutionary Army of Generalissimo Chiang Kai-shek of the Republic of China during the Second Sino-Japanese War and the Chinese Civil War
  • Brigade Mobil SOF of Indonesian Police still use Bren in services. After Independence War 1945-1950 TNI use Bren as machine gun squad.
  • Hellenic Air Force (HAF).
  • General Operations Force of the Royal Malaysian Police (before replaced by the 7.62 NATO HK 11).
  • Both sides of the Nepalese Civil War.
  • Democratic Army of Greece (DSE) during the Greek Civil War (1946-1949).
  • Indian Army
  • Sri Lanka Army
  • Canadian army during WWII
  • Poland during WWII.
  • Nepalese Army

[edit] See also

[edit] Gallery of images

[edit] Resources

Book.jpg
Gun Owners' Resource has the following relevant documents available for free download for the Bren light machine gun and/or its variants:
The following diagrams are also available for reference:
Parts1.jpg This article is either missing some diagrams which would help to illustrate a proper breakdown of the firearm in question or the diagrams which are here are inadequate. This article could use more input to fill in the missing bits. You (yes, you!) can help Gunsopedia provide more comprehensive information to our users by using your own knowledge to add to it.


[edit] Notes

  1. Ordnance Factory Board
  2. 2.0 2.1 2.2 Dunlap, Roy F., Ordnance Went Up Front, The Samworth Press, 1948.
  3. George MacDonald Fraser, Quartered Safe Out Here (1992): The Harvill Press ISBN 0-00-272660-2
  4. George, John (Lt. Col.) Shots Fired In Anger, The Samworth Press, 1948.
  5. http://www.quarry.nildram.co.uk/Assault.htm Assault rifles and their ammunition

[edit] References

  • Dunlap, Roy F., Ordnance Went Up Front, The Samworth Press, 1948.
  • George, John (Lt. Col.) Shots Fired In Anger, The Samworth Press, 1948.

[edit] External links

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox